logo
  • Indonesian
Rumah ProdukPeralatan Laboratorium Medis

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample

Sertifikasi
Cina Biovantion Inc. Sertifikasi
Ulasan pelanggan
Sangat bagus. semuanya sudah lengkap. terima kasih

—— Maryl Joy Prado-Filipina

Komunikasi yang sangat baik dan mudah. Produk bekerja dengan baik dengan kontrol positif dan kelompok uji.Akan memesan lagi tanpa ragu-ragu.

—— Olof Olson, Amerika Serikat

I 'm Online Chat Now

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample
MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample

Gambar besar :  MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample

Detail produk:
Tempat asal: Cina
Nama merek: HUXI
Sertifikasi: CE
Nomor model: MD200-1
Syarat-syarat pembayaran & pengiriman:
Kuantitas min Order: 1
Harga: Dapat dinegosiasikan
Kemasan rincian: Kotak
Waktu pengiriman: 7-15 hari
Syarat-syarat pembayaran: T/T
Menyediakan kemampuan: 100

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample

Deskripsi
Model: MD200-1(12 position dry type Nitrogen evaporator) Nomor barang: 1007007001
Rentang temp (° C): RT+5 ~ 150 Waktu yang ditetapkan: 0~99 jam 59 menit
Akurasi kontrol temp (° C): ≤ ± 0,5 Akurasi tampilan (°C): 0.1
Keseragaman suhu@100 ° C.: ≤±0,5°C Keseragaman suhu@150 ° C.: ≤±1°C
Menyoroti:

Evaporator nitrogen tipe kering

,

Evaporator nitrogen kering

,

Persediaan Concentrated Sample Nitrogen Evaporator

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample 0Linear Shaker

 
 

Application:

The nitrogen evaporator is mainly used for the concentrated preparation of large
quantities of samples, such as sample preparation in drug screening, hormone
analysis, liquid phase, gas phase and mass spectrometry analysis. Working
principle: By blowing nitrogen gas into the surface of the heated sample, the solvent
in the sample is quickly evaporated and separated, so as to achieve the purpose of
oxygen-free concentration of the sample and keep the sample more pure. Using a
nitrogen evaporator instead of a rotary evaporator for concentration, can concentrate
dozens of samples at the same time, greatly shortening the sample preparation time,
and has the characteristics of time-saving, easy operation, and fast.
 

 

Main Features:

 
Automatic fault detection and alarm function;
Standard equipped with air cavity and special
adjustable bracket;
Built-in over temperature protection device;
Instant temperature display, time decrease display;
Each purge needle can be independently
controlled, with multi-channel control switch, no
waste of gas;
The heater enables the sample to be quickly and
effectively heated to the evaporation temperature,
while the gas is blown from the gas chamber to the
surface of the solution through the gas needle to
promote rapid evaporation of the solution and
concentration of the sample;
The entire working system consists of an adjust
able gas chamber and heater;
The position of the gas needle in the air cavity can
be changed to make it suitablefor different test tube
standards. The length of the gas needle is 150mm;
The height of the air chamber can be adjusted
according to the height of the solvent liquid level.
When the toxic solvent is concentrated, the whole
system can be placed in the fume hood.
MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample 1

 

Specification

 

MD200-1 Penghangat Nitrogen Tipe Kering Alat Utama untuk Persiapan Concentrated Sample 2

Rincian kontak
Biovantion Inc.

Kontak Person: Mr. Steven

Tel: +8618600464506

Mengirimkan permintaan Anda secara langsung kepada kami (0 / 3000)